Removal and Replacement Procedures

6.Remove all drive blanks and hard drives. Refer to “Hot-Plug Hard Drive Blank” and “Hot-Plug Hard Drive” earlier in this chapter.

7.Remove the four screws securing the drive cage to the chassis with a Torx T-15 screwdriver (1).

8.Pull the hot-plug hard drive cage out from the chassis (2).

2

1

1

1

Figure 2-20: Removing a hot-plug hard drive cage

To replace a hot-plug hard drive cage, reverse steps 2 through 8.

Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide

2-23

Page 37
Image 37
Compaq ML350 manual Removing a hot-plug hard drive cage