Connectors, Switches, and LEDs

Resetting System Configuration Settings

It may be necessary at some time to clear and reset system configuration settings. When the system configuration switch position 6 is set to the on position, the system is prepared to erase all system configuration settings from both CMOS and nonvolatile RAM (NVRAM):

IMPORTANT: Clearing NVRAM deletes the configuration information. Refer to the Compaq ProLiant ML350 Generation 3 Server Setup and Installation Guide for complete instructions on configuring the server.

1.Power down the server.

2.Set the system configuration switch position 6 to the on position.

3.Power up the server. All configuration settings are now erased and all system operations halt.

4.Power down the server.

5.Reset the position 6 switch to the default off position.

6.Power up the server.

7.Reset all system configuration settings.

Refer to Chapter 3 of this guide, “Diagnostic Tools,” or refer to the Compaq ROM-Based Setup Utility User Guide found on the server documentation CD for more information on RBSU.

4-6

Compaq ProLiant ML350 Generation 3 Server Maintenance and Service Guide

Page 65
Image 65
Compaq ML350 manual Resetting System Configuration Settings