Compaq N610V, N600c, N620C manual Disconnecting the Pointing Device and Keyboard Cables

Removal and Replacement Procedures

7.Lift the top edge of the keyboard and swing it up and forward until it rests on the top cover 1 (Figure 5-12).

8.Disengage the keyboard cable from the retaining clips in the top cover.

9.Release the ZIF connector to which the pointing device cable is attached 2 and disconnect the pointing device cable 3.

10.Release the ZIF connector to which the keyboard cable is attached 4 and disconnect the keyboard cable 5.

Figure 5-12. Disconnecting the Pointing Device and Keyboard Cables

11. Remove the keyboard.

Reverse the preceding procedure to replace the keyboard.

Maintenance and Service Guide 5–21