Compaq N620C, N610V manual Removing the Fan on an Evo Notebook N600c

Removal and Replacement Procedures

✎Steps 5 through 7 apply only to Evo Notebook N600c models.

5.Remove the PM2.0 × 4.0 screw 1 and PM2.5 × 5.0 screw 2 that secure the fan to the system board (Figure 5-29).

6.While holding the system board above the work surface, push the left side of the fan up 3 from the bottom of the system board.

7.When the left edge of the fan has cleared the system board, slide the fan to the left 4 and out of the heat sink.

Figure 5-29. Removing the Fan on an Evo Notebook N600c

5–44 Maintenance and Service Guide