Compaq NC6400 manual Reverse the above procedure to install an MultiBay II device

Removal and Replacement Procedures

3.Remove the Phillips PM2.5×5.0 screw 1 that secures the MultiBay II device to the computer.

4.Push in on the right side of the MultiBay II device 2. (The MultiBay II device partially protrudes from the MultiBay II.)

5.Slide the MultiBay II device 3 out of the computer.

Removing the MultiBay II Device

Reverse the above procedure to install an MultiBay II device.

5–22 Maintenance and Service Guide