Compaq NC6400 manual Diagnostics Menu, System Configuration Menu

Troubleshooting

Diagnostics Menu

	Table 2-3
	Diagnostics Menu
Select	To do this
Hard Drive Self-Test	Run a comprehensive self-test on any hard drive in
options	the system or on any optional MultiBay hard drive.
Memory Check	Run a comprehensive check on system memory.
Startup Check (select	Verify the system components needed for starting the
models only)	computer.

System Configuration Menu

✎Some of the listed System Configuration options may not be supported by your computer.

Table 2-4

System Configuration Menu

Select	To do this
Language (or press f2)	Change the Computer Setup language.
Boot options	■ Set f9, f10, and f12 delay when starting up.
	■ Enable/disable CD-ROM boot.
	■ Enable/disable floppy boot.
	■ Enable/disable internal network adapter boot and
	set the boot mode (PXE or RPL).
	■ Enable/disable MultiBoot, which sets a boot order
	that can include most boot devices in the system.
	■ Set the Express Boot Popup delay in seconds.
	■ Set the boot order.

Maintenance and Service Guide 2–7