Removal and Replacement Procedures
5.11RTC Battery
✎The RTC battery is included in the Plastics Kit, spare part number
1.Prepare the computer for disassembly (Section 5.3).
2.Release the keyboard (Section 5.10).
3.Disconnect the RTC battery cable 1 from the system board and remove the cable from the clips 2 in the top cover.
4.Remove the RTC battery 3 from the clip in the base enclosure.
✎The RTC battery is secured to the top cover by
Removing the RTC Battery
Reverse the above procedure to install an RTC battery.
Maintenance and Service Guide |
