Compaq NC6400 manual Reverse the above procedure to install the modem module

Removal and Replacement Procedures

3.Remove the two Phillips PM2.0×6.0 screws 1 that secure the modem module to the system board.

4.Lift the right side of the modem module 2 to disconnect it from the system board.

5.Disconnect the modem module cable 3 from the modem module.

✎The modem module cable is included in the modem module spare part kit and is also available in the Cable Kit, spare part number 418876-001.

6.Remove the modem module.

Removing the Modem Module

Reverse the above procedure to install the modem module.

5–32 Maintenance and Service Guide