Compaq S0000 Series manual Reassembling the pc, Replacing the front bezel on the S0000 series

reassembling the pc

1Replace the front bezel by following the method appropriate for your PC model.

•To replace the front bezel on the S0000 series, position the chassis in the upright position. At an angle, align the top of the front bezel with the top slots of the chassis (1) so that the front bezel hooks onto the chassis, and then press the bottom end of the bezel to the chassis until it snaps into place (2).

1

2

replacing the front bezel on the S0000 series

•To replace the front bezel on the 8000 series, lay the chassis on the side with the open side up. Place the front bezel in the correct position. Ensure the slots (2) are aligned correctly, and rotate the bezel toward the chassis (1) until it snaps into place.

replacing the front bezel on the 8000 series

upgrading and servicing the pc 107