Telnet Command Console | Compex Technologies NetPassage 15B specification

Chapter 2 Getting Started

Configuration menu

Let’s you set up your NetPassage 15B to connect to

your network easily. Hyperlinks connect you to various menus.

Help menu

Get advice from our friendly technical support engineer.

Command menu		Configuration
Consists of 3 main		window
menus.		Edit various
∙	Configuration	attributes of
∙	System Tools	the menu here.

∙Help



System Tools				Message Window
Edit various				Give you a history of the
internal settings of				various events. Various
NetPassage 15B.				configuration messages
NetPassage 15B.				are also displayed here.
				are also displayed here.

Figure 2.3.1-2

NetPassage 15B Configuration Interface

2.3.2TELNET Command Console

Alternatively, the user may connect to the Command Console of NetPassage 15B via a TELNET session to the default IP of NetPassage 15B, 192.168.168.1. This section uses Microsoft TELNET command for instruction. You may use any TELNET client.

Connecting to NetPassage 15B’s Command Console via TELNET

1.Connect to NetPassage 15B’s Command Console with the following command at DOS prompt. The TELNET application will then be launched and connect to NetPassage 15B.

C:\WINDOWS\TELNET 192.168.168.1

2.At the login prompt, type in “password” (default password) and press the <ENTER> key, as shown in Figure 2.3.2-1. You will then login to the Command Console of NetPassage 15B.

15

Image 22

$Compex Technologies Telnet Command Console, Connecting to NetPassage 15B’s Command Console via Telnet, Windows\Telnet$

Contents

Page Disclaimer Trademark InformationYour Feedback FCC Notice Declaration of Conformity Compex, Inc Technical Support InformationReadyLINK Networktechnology GmbH About this Document Conventions Table of Contents NetPassage 15B’s System Tools Introduction Key FeaturesProduct Overview Broadband Internet Sharing Web-based Configuration Interface Integrated 4-port 10/100Mbps SwitchTime-based Access Management Parallel Broadband Package Contents Panel Views & Descriptions Panel Views Index Indicator Description Panel Description Technical Data NetPassage 15B Specifications Hardware Setup Getting Started 192.168.168.1 TCP/IP Configuration of the ComputersFor Microsoft Windows 95/98/ME For Microsoft Windows 2000/XP 192.168.168.X Configuring your Computer with Static IP AddressNetmask 255.255.255.0 Subnet Mask 255.255.255.0 Gateway 192.168.168.1 DNS Server Subnet Mask of 192.168.168.X and 255.255.255.0 respectively DNS Configuration Window Connecting to the Configuration Interface \WINDOWS\PING Command Menu Proxy SettingsConnecting to Web-based Configuration Interface Configuration Window Connecting to NetPassage 15B’s Command Console via Telnet Telnet Command Console\WINDOWS\TELNET Command Console Login Configuring IP Addressing Configuring NetPassage 15BSetting up your LAN IP Address Advanced Option for Dhcp Server To reserve IP addresses for specific computers To view the IP released by the Dhcp Server 5 titled Australia Big Pond Cable Internet 4 titled Singapore Singtel Magix SuperSurfCable Internet with Dynamic IP Assignment Cloning MAC Address to NetPassage 15B Cable Internet with Static IP Assignment Static IP Configuration Idle Timeout PasswordService Name Username Use non-standard Pppoe Singapore SingTel Magix SuperSurfReconnect Time Factor Ethernet type Network Address Translator NAT Australia Big Pond Cable Internet Introduction to Virtual Servers Virtual Server based on Port Forwarding Virtual Server based on IP Forwarding Defining Virtual Server based on De-Militarized Zone DMZ Defining Virtual Server based on Port Forwarding Defining Virtual Server based on IP Forwarding Defining De- Militarized Zone Configuring Routing Protocol Static Routing Dynamic Routing IP Packet Filtering Internet Application Filtering Activating Remote Router Management Managing NetPassage 15B from the InternetSelect Single from the drop down menu Http Port Telnet Port Implementing Parallel Broadband NetPassage 15B’s System Tools Setting Router IdentitySynchronizing Router’s Clock with your Computer Upgrading Router’s Firmware Profile Saving, Restore & Reset to Defaults Rebooting NetPassage 15B Changing Administrative Password Appendix a Console Commands Delete Command Disconnect Command Enable CommandDisable Command Edit Command Singapore Pacific Internet Broadband Appendix B ISP-Specific NotesSingapore SingNet Broadband Germany T-DSL & T-Online Appendix C Frequently Asked Questions Action Normal Reset Password to Reset to factory Procedure for resetting password to default