
Chapter 3 Configuring NetPassage 15B
Figure
Defining Filtering
Function
4.To define a rule for
Rule Name | Enter your preferred name for this rule |
IP Address | Select Range from the drop down menu |
(From) | 192.168.168.10 |
(To) | 192.168.168.11 |
Destination Port | Any |
(From) | <blank> |
(To) | <blank> |
Day of the Week | Any |
(From) | Sun |
(To) | Sun |
Time of the day | Select Range from the drop down menu |
(From) | 22:00 |
(To) | 08:00 |
5.Press the Apply button to add this filtering function into the list.
6.Ensure that the Sent radio button is “checked”.
7.Press the Apply button for the changes to be effective.
3.5.2Internet Application Filtering
To define a function to perform Internet Application Filtering:
1.Press the Add button at the filtering configuration page as shown in Figure
2.To define a rule to perform Internet Application Filtering, you need to know the TCP port of the application of which this rule applies. For example, if you wish to
35