Conceptronic CNETCAM, Conceptronic, C54NETCAM manual DateTime

6.4.6. DateTime

Click the DateTime item in the left column to setup time and date for your camera, providing correct information for the remote users who might be thousands of miles away from the camera’s location.

- Date & Time:	You can set up time and date manually or automatically by
	selecting the	Synchronized with Time Server option.
- Synchronized with Time Server:		Select this option and the time will be based
		on GMT setting. The time will be
		synchronized every 10 minutes. When
		selecting this option, you have to enter the
		required information in the following fields:
IP Address	Enter the IP Address of the Time Server in this box.
Protocol	Two options of NTP or Time are available for your selection
TimeZone	to link with the Time Server. The default setting is NTP.
	Select the time zone for the region from the pull-down menu.
Set Manually:	Select this option to set the time manually. The system
	administrator must enter the date and time in the respective
	field manually.