Conceptronic Conceptronic, CNETCAM, C54NETCAM manual Ssid

Click the Wireless item in the left column to setup the wireless LAN configuration of your camera.

- Connection Mode:	Use this option to determine the type of wireless
	communication for your camera.
	There are two choices of Infrastructure mode and Ad-Hoc
- SSID:	mode. The default setting is Infrastructure.
	The SSID (Service Set Identifier) is the name assigned to the
	wireless network. It will auto-detect and display the SSID of
	wireless network connected in this box (it displays default
	initially). This default setting will let the camera connect to
	ANY access point under the infrastructure network mode.
	To connect the camera to a specific access point on the
	network, please make sure to set the SSID of the camera to
	correspond with the access point’s SSID for communication.
	Type any string up to 32 characters long (spaces, symbols,
	and punctuation are not allowed) in the Network Name box.
	To connect the camera to an Ad-Hoc wireless workgroup,
	make sure to set the same wireless channel and SSID to
	match with the PC/Notebook’s configuration for direct
- Wireless Channel:	wireless communication.
	This pull-down menu provides the wireless channel for
	communication. A "channel" is a range of frequencies to be
	used in communication between the camera and access
	point in Infrastructure mode, or the camera and PC/Notebook
	in Ad-Hoc