Concord Camera 4360Z manual Setting the CAMERA’S Operational Mode, Single Shot

Models: 4360Z

1 61
Download 61 pages 8.23 Kb
Page 11
Image 11

GETTING STARTED / TAKING A PICTURE

SETTING THE CAMERA’S OPERATIONAL MODE

The camera has 3 operational modes Camera Mode, Review Mode and Video Clip Mode.

1. To change the camera operational mode, slide the mode switch horizontally to the corresponding position.

En

Camera Mode Use the camera mode setting to take pictures or to customize your camera settings for picture taking.

Review Mode Use the review mode setting to browse through images and video clips or to delete images from the internal memory or memory card.

Video Clip Mode Use video clip mode to capture video clips.

Note: No sound will be recorded.

SINGLE SHOT

Taking a Picture with the Viewfinder

A 4

28/45

 

N

fig.1.1

 

A

4

28/45

 

 

N

 

fig.1.2

 

Taking a picture with the viewfinder:

1.Turn the camera on.

The LCD can be switched off to conserve battery power by pressing the ( ) button.

2.Frame the subject in the viewfinder.

3.Press the shutter button half-way to activate the auto-focus until the green AF LED lights up. (For information on Focus Lock, please go to page 12) (fig.1.1)

The camera will focus the lens at different distances to find the correct focus range, and you will hear a rapid click sound from the camera.

4.Press the shutter button fully to capture the image. (fig.1.2)

The camera will beep when the image is captured if sound is activated.

The camera will make a click sound.

When the image has been captured, the Flash Ready LED next to the viewfinder will blink to indicate that the image is being stored.

10

Page 11
Image 11
Concord Camera 4360Z manual Setting the CAMERA’S Operational Mode, Single Shot, Taking a Picture with the Viewfinder