Concord Camera 4360Z manual Turning the LCD/ICONS on and OFF, Setting the Time

GETTING STARTED

Setting the Time

ADJUST TIME ADJUST TIME ADJUST TIME

En

01:01AM 01:01 AM 01:02 AM

RETURN

OK SET RETURN

OK SET RETURN

OK SET

The time is displayed in hour, minute format.

1. Press to change the selection in the blinking position until you reach the desired setting.

2.Press to highlight the hour (HH), minutes (MM) or AM/PM.

• The selection will blink when it is highlighted.

3.Repeat steps 1 and 2 until the time is set.

4.Press to set the time.

Note:

The time can be displayed in a 12-hour or 24-hour format. Please go to page 31 to change this setting. If the battery is removed or dead for more than 4 minutes, the time will return to its default setting.

TURNING THE LCD/ICONS ON AND OFF

LCD can be used to frame subjects for image and video clip capture, review stored images and video clips, and display the current camera settings.

A	4	28/45
AWB
07 ⁄ 04 ⁄ 03 02:40PM

Icons off LCD off LCD on with icons

1. Use the ( ) button to toggle the LCD mode. The LCD mode changes each time the button is pressed.

Note: In order to save battery power, you may turn off the LCD display or LCD will automatically turn off after one minute of inactivity.

8