Continental Electric CELED48157 External Connection, Antenna connection, Stand and wall-mounted

External Connection

Antenna connection

Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the antenna jack. For details Please refer to the following drawing.

Antennas with 300 Ω flat twins Leads Antennas with 75 Ω Round Leads

Use a 75ohm - 300ohm converter

ANT IN

300ohm coaxial cable

Antenna feeder

75ohm coaxial cable Antenna cable

Stand and wall-mounted

How to assemble the stand?

The LED TV is assembled without the stand before leaving the factory, if you need to assemble the stand, operate as follows:

-Before attaching/detaching the stand, make sure to turn off the TV.

-Before performing work, spread cushioning over the base area to lay the LED TV on. This will prevent it from being damaged.

Assembling instruction:

1) Fix the stand and the unit together with screws.

Screws(5-M4X10)

7