Menu system instruction
Channel
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an antenna or a cable system).
1.Press MENU key to display the main menu on the screen.
2.Press / key to select "Channel" option.
3.Press OK or key to enter "Channel" submenu.
Antenna
1.Press / key to select "Antenna" option.
2.Press / key to select "Cable" or "Antenna”.
Current CH
1.Press / key to select "Current CH" option.
2.Press / key to select current channel.
Color System
1.Press / key to select “Color System" option.
2.Press / key to select the color system
(PAL M, PAL N, NTSC).
Antenna | Cable |
Current CH | NTSC |
Color System | |
Auto Search |
|
DTV Manual Search | |
Programme Edit |
|
Fine Tune |
|
Signal Information | |
Select | Menu:Return |
Color System | NTSC |
Auto Search
DTV Manual Search
Please select “Start” button to begin auto tuning.
StartCancel
SelectMenu:Return
Auto Search
The TV automatically cycles through all of the available channels and stores them in memory.
1. Press / key to select "Auto Search" option.
2.Press OK or key ,then a notice window will be displayed on the screen. Select "Start" to start search or "Cancel" to cancel it.
When Searching, press EXIT key to exit tuning at any moment.
Press MENU key to skip DTV tuning when searching DTV, skip ATV tuning when searching ATV, skip CATV tuning when
searching CATV.
3.After all the available channels are stored, the searching menu will exit.
DTV Manual Search
Enter digital number and press “OK” to select
DTV Channel.
Bad Normal Good
Menu Return
23
