CHECKS BEFORE STARTING

Check that the crankcase oil is filled to full mark on dipstick.

Adjust the seat position and make certain you can reach all controls.

Fill the fuel tank with fresh fuel.

FUEL RECOMMENDATIONS

For daily operation: Use only unleaded gasoline with a pump sticker octane rating of 87 or higher. Gasohol (up to 10% ethyl alcohol, 90% unleaded gasoline by volume) is approved as a fuel. Methyl Teriary Butyl Ether (MTBE) and unleaded gasoline blends (up to a maximum of 15% MTBE by volume) are approved as a fuel. No other gaso-

line/alcohol or gasoline/ether blends are approved. Do not use fuel additives other than fuel stabilizer.

For storage: CAUTION: Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract mois- ture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Drain the gas tank, start the engine, and let it run until the fuel lines and carburetor are empty (see STORAGE for fuel

draining procedure). Use fresh fuel next season. See STORAGE instructions for additional information.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. To add fuel:

1.Remove the fuel cap (B, Figure 2).

2.Fill the tank. Do not overfill. Leave room in the tank for fuel expansion.

3.Install and hand tighten the fuel cap.

tLWARNING

Never allow passengers to ride on the unit.

Before leaving the operator's position for any reason, engage the parking brake, disengage the PTO, stop the engine and remove the key.

To reduce fire hazard, keep the engine, rider and mower free of grass, leaves and excess grease.

Do not stop or park rider over dry leaves, grass or combustible materials.

Gasoline is highly flammable and must be handled with care. Never fill the tank when the

engine is still hot from recent operation. Do not allow open flame, smoking or matches in the area.

Avoid over=filling and wipe up any spills.

Figure 2. Pre=Start Checks

A. Seat Adjustment Knob

B. Fuel Tank Cap

WARNING

Never operate on slopes greater than 17.6 percent (10 °) which is a rise of 3=1/2 feet (106 cm) vertically in 20 feet (607 cm) horizontally.

Select slow ground speed before driving onto a slope. Use extra caution when operating on slopes with a rear=mounted grass catcher.

Mow UP and DOWN the slope, never across the face. Use caution when changing directions and

DO NOT START OR STOP ON A SLOPE.

WARNING - TRAILERS

Do not load this zero-turn rider on a trailer or

truck using two separate ramps. Only use a single ramp that is at least one foot wider than the width of the rear wheels of this rider. This

rider has a zero turning radius and the wheels could fall off the ramps, or the rider could tip over injuring the operator or bystanders.

12

Page 12
Image 12
Craftsman 107.2777 manual Checks Before Starting, Fuel Recommendations, Avoid over=filling and wipe up any spills

107.2777 specifications

The Craftsman 107.2777 is a versatile and robust tool that caters to both amateur and professional craftsmen alike. Designed for superior performance and user convenience, this power tool is a favorite among DIY enthusiasts and contractors who appreciate its reliability and feature-rich design.

One of the standout features of the Craftsman 107.2777 is its powerful motor, which delivers outstanding torque and efficiency. This motor is designed to handle a variety of tasks, from heavy-duty applications to delicate work, allowing users to seamlessly transition between different projects. The tool’s lightweight construction also means that it’s easy to maneuver, reducing fatigue during extended use.

The Craftsman 107.2777 boasts an ergonomic design that emphasizes user comfort. Its non-slip grip provides a secure hold, while the optimized balance ensures that the tool feels stable in hand. This is particularly advantageous for long periods of use, as it minimizes strain on the wrist and hand.

In terms of versatility, the Craftsman 107.2777 is equipped with an adjustable speed setting, allowing users to tailor the tool’s performance to match the requirements of specific tasks. This feature is especially useful when working with various materials, from wood and metal to plastic. The tool also comes with multiple attachments and accessories, enhancing its functionality for a wide range of applications.

Safety is a paramount consideration in the design of the Craftsman 107.2777. The tool features a built-in safety switch that prevents accidental activation, giving users peace of mind while working on projects. Additionally, the durable casing protects the internal components from dust and debris, helping to prolong the life of the tool.

Another key characteristic of the Craftsman 107.2777 is its compatibility with a range of Craftsman accessories. This means users can easily expand their tool collection without having to worry about compatibility issues, making this model a cost-effective choice for those looking to enhance their workshop capabilities.

Overall, the Craftsman 107.2777 stands out as a reliable, efficient, and user-friendly tool that meets the demands of any crafting job. Its combination of advanced features, ergonomic design, and safety considerations make it a must-have for both novice DIYers and seasoned professionals. Whether you’re tackling home improvement projects, building furniture, or working on repairs, the Craftsman 107.2777 delivers exceptional performance and versatility.