ReadthesesafetyrulesandfollowthemcloselyFailuretoobeytheserulescouldresultin. lossofcontrol of unit,severepersonalinjuryordeathtoyou,or bystanders,ordamagetopropertyorequipment.

This mowing deck is capable of amputating hands and feet and throwin og_bjb'ects.

The triangle _ in text signifies important cautions or warnings which must be followed.

GENERAL OPERATION

t.Read, understand, and follow all instructions in the

manual and on the unit before starting.

2.Do not put hands or feet near rotating parts or under the machine. Keep clear of the discharge opening at all times.

3.Only allow responsible adults, who are familiar with the instructions, to operate the unit (local regulations can restrict operator age).

4.Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade(s).

5.Be sure the area is clear of other people before mow- ing. Stop the unit if anyone enters the area.

6.Never carry passengers.

7.Do not mow in reverse unless absolutely necessary. Always look down and behind before and while travel- ling in reverse.

8.Never direct discharge material toward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blade(s) when crossing gravel surfaces.

9.Do not operate the machine without the entire grass catcher, discharge guard (deflector), or other safety

devices in place.

10.Slow down before turning.

11.Never leave a running unit unattended. Always disen- gage the PTO, set parking brake, stop engine, and remove keys before dismounting.

12.Disengage blades (PTO) when not mowing. Shut off engine and wait for all parts to come to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge guard.

13.Operate the machine only in daylight or good artificial light.

14.Do not operate the unit while under the influence of alcohol or drugs.

15 Watch for traffic when operating near or crossing roadways.

16.Use extra care when loading or unloading the unit into a trailer or truck.

17.Always wear eye protection when operating this unit.

18.Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-related injuries. These operators should eval- uate their ability to operate the riding mower safely enough to protect themselves and others from injury.

19.Follow the manufacturer's recommendations for wheel weights or counterweights.

20.Keep in mind the operator is responsible for accidents occurring to other people or property.

21.All drivers should seek and obtain professional and practical instruction.

22.Always wear substantial footwear and trousers. Never operate when barefoot or wearing sandals.

23.Before using, always visually check that the blades and blade hardware are present, intact, and secure. Replace worn or damaged parts.

24.Disengage attachments before: refueling, removing an attachment, making adjustments (unless the adjustment can be made from the operator's posi- tion).

25.When the machine is parked, stored, or left unattend- ed, lower the cutting means unless a positive mechanical lock is used.

26.Before leaving the operator's position for any reason, engage the parking brake, disengage the PTO, stop the engine, and remove the key.

27.To reduce fire hazard, keep the unit free of grass, leaves, & excess oil. Do not stop or park over dry leaves, grass, or combustible materials.

28.It is a violation of California Public Resource Code

Section 4442 to use or operate the engine on or near any forest-covered, brush-covered, or grass-covered land unless the exhaust system is equipped with a spark arrester meeting any applicable local or state

laws. Other states or federal areas may have similar laws.

TRANSPORTING AND STORAGE

t.When transporting the unit on an open trailer, make sure it is facing forward, in the direction of travel. If the unit is facing backwards, wind lift could damage the unit.

2.Always observe safe refueling and fuel handling prac- tices when refueling the tractor after transportation or storage.

3.Never store the unit (with fuel) in an enclosed poorly ventilated structure. Fuel vapors can travel to an igni- tion source (such as a furnace, water heater, etc.) and cause an explosion. Fuel vapor is also toxic to humans and animals.

4.Always follow the operator's manual instructions for storage preparations before storing the tractor for both short and long term periods.

5.Always follow the engine manual instructions for

proper start-up procedures when returning the unit to service.

6.Never store the unit or fuel container inside where

there is an open flame or pilot light, such as in a water heater. Allow unit to cool before storing.

TP 600-2459-06-UV-SIvIA

Page 3
Image 3
Craftsman 107.2777 manual General Operation

107.2777 specifications

The Craftsman 107.2777 is a versatile and robust tool that caters to both amateur and professional craftsmen alike. Designed for superior performance and user convenience, this power tool is a favorite among DIY enthusiasts and contractors who appreciate its reliability and feature-rich design.

One of the standout features of the Craftsman 107.2777 is its powerful motor, which delivers outstanding torque and efficiency. This motor is designed to handle a variety of tasks, from heavy-duty applications to delicate work, allowing users to seamlessly transition between different projects. The tool’s lightweight construction also means that it’s easy to maneuver, reducing fatigue during extended use.

The Craftsman 107.2777 boasts an ergonomic design that emphasizes user comfort. Its non-slip grip provides a secure hold, while the optimized balance ensures that the tool feels stable in hand. This is particularly advantageous for long periods of use, as it minimizes strain on the wrist and hand.

In terms of versatility, the Craftsman 107.2777 is equipped with an adjustable speed setting, allowing users to tailor the tool’s performance to match the requirements of specific tasks. This feature is especially useful when working with various materials, from wood and metal to plastic. The tool also comes with multiple attachments and accessories, enhancing its functionality for a wide range of applications.

Safety is a paramount consideration in the design of the Craftsman 107.2777. The tool features a built-in safety switch that prevents accidental activation, giving users peace of mind while working on projects. Additionally, the durable casing protects the internal components from dust and debris, helping to prolong the life of the tool.

Another key characteristic of the Craftsman 107.2777 is its compatibility with a range of Craftsman accessories. This means users can easily expand their tool collection without having to worry about compatibility issues, making this model a cost-effective choice for those looking to enhance their workshop capabilities.

Overall, the Craftsman 107.2777 stands out as a reliable, efficient, and user-friendly tool that meets the demands of any crafting job. Its combination of advanced features, ergonomic design, and safety considerations make it a must-have for both novice DIYers and seasoned professionals. Whether you’re tackling home improvement projects, building furniture, or working on repairs, the Craftsman 107.2777 delivers exceptional performance and versatility.