Craftsman 107.2777 manual Seat Adjustments, Ground Speed Control Lever Adjustment

\ /

\

Figure 29. Seat Adjustment

A. Seat Adjustment Knob (Underside of Seat Deck)

SEAT ADJUSTMENTS

The seat and ground speed control levers should be adjusted so the ground speed control levers can be moved through their full range of motion.

The seat can be adjusted forward and back. Loosen the adjustment knob (A, Figure 29) located on the underside of the seat deck, move the seat to the desired position, then tighten the knob.

Figure 30. Control Lever Adjustment A. Jam Nut

B. Carriage Bolt

C. Forward Slot

D. Mount Bolts

E. Knob

GROUND SPEED CONTROL LEVER

ADJUSTMENT

The control levers have three adjustments:

To Adjust Control Lever Height: Pull the levers in across the operator's lap to their DRIVE positions. Loosen the mount bolts (D, Figure 30) and raise or lower the levers to the desired position. Tighten the mounting bolts.(D).

To Adjust Control Lever End Gap: The control lever end gap should be adjusted so that the levers do not contact each other when placed in DRIVE positions.

Loosen the jam nut (A, Figure 30) and adjust the length of the carriage bolt (B) so that the levers do not contact each other. Repeat on the opposite side. Tighten the jam nut (A) to lock the carriage bolt in position.

To Adjust Operator Clearance: The space between the operator and the control levers can be increase by removing the upper mounting bolt (D, Figure 30), pivoting the lever forward, and reinstalling the capscrew through the control lever and forward slot (C). Repeat with the other ground speed lever.

SPEED BALANCING ADJUSTMENT

If the rider veers to the right or left when the ground speed control levers are in the maximum forward posi- tion, the top speed of the right lever can be balanced by turning the adjustment knob (E, Figure 30). Turn the knob COUNTERCLOCKWISE to increase speed or CLOCKWISE to decrease speed

26