ICRAFTSMAN°I

DRAWER AND WORK SURFACE

PARTS REPLACEMENT

SLIDE REPLACEMENT

Tools Required:
Drill
5/32" Drill bit
Rivet gun
Removal
•Remove drawer or work surface from
unit. (See drawer and work surface
installation and removal.)
• Carefully drill out rivet holding slide
drawer member to drawer orwork
surface.
• Rotate front of slide drawer member
down and out.
• Pull slide forward to remove.
• Carefully drill out rivet holding slide
unit member in place.
• Pull slide unit member forward to
remove.
Installation
•Separate slide drawer member from
unit member. (See drawer and work
surface installation and removal.)
• install new slide unit member. (Install
back hanger first.)
• Rivet unit member in place as shown.
• install drawer member. (Install back
hanger first.)
• install rivet to hold slide drawer
member in place.
• Reinstall drawer or work surface into
unit. (See drawer and work surface
installation and removal.)
Work Surface
%,
Slide
Drawer
Left side
Slide
Back hanger
place
Rivet
Hanger
pointed up
Drawer
Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA F1613 2