ICRAFTSMAN°I
TOP, WIRING HARNESS, HARNESS GROMMET

Parts Replacement

Roll-away top

WIRING HARNESS REPLACEMENT

HARNESS GROMMET REPLACEMENT

Tools Required:
3/8" Wrench
WIRING HARNESS AND HARNESS
GROMMET REMOVAL
•Disconnect power from unit.
• Remove pull out work surface and
enough drawers to reach the top back
inside of the unit. (See drawer and
work surface installation and
removal.)
• Remove lock and top from roll-away.
(See roll-away top removal and
installation.)
• Remove harness grommet from roll-
away.
WIRING HARNESS REMOVAL
• For units with accent lighting under
roll-away, remove bottom drawer and
disconnect accent lighting.
• Remove wiring harness through hole
in roll-away top.
WIRING HARNESS AND HARNESS
GROMMET INSTALLATION
•Insert new wiring harness assembly
into mounting track through hole in top
of roll-away (connector should be on
top.) Slide wiring harness assembly to
bottom of roll-away.
• Install harness grommet over
connector. Insert into hole intop of
roll-away.
• Reinstall top and lock
• If unit has accent lighting, reconnect
accent lighting.
• Test lock operation.
• Reinstall drawers.
• Reconnect power tothe unit.
Harness grommet
Harness
Grommet
Wiring harness
Insert assembly
into track in unit.
Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA F1615 2