SWITCH
See Figure 2,
TOtum yourdrill ON, depress the switch tdgger. To
turnit OFF, release the switch trigger.
SELECTOR
CENTERPosmoN
(LOCK)

SWITCH

TRIGGER Fig.2

VARIABLE SPEED
This tool has a vadable speed switch that delivers
higher speed and torque with increased tdgger
pressure. Speed is controlled by theamount of switch
trigger depression.
Note: You might hear awhistling or ringing noise from
the switch during use. DO not beconcerned, this isa
normal part ofthe switch function.
TO INSTALL BATTERY PACK
•Lock switchtdgger on your drill by placing the
direction of rotation selector in center position.
See Figure 2.
•Place battery pack in yourdrill, Align raised rib
inside ddll with groove on battery pack. See
Figure 3,
DE HES
TO RELEASE
BATrlENTPACK Fig. 3
• Make sure the latches on each side of your
battery pack snap in place and battery pack Is
secured indhll before beginning operation.
_CAU'rlON: When placing battery pack in your
ddll, be sure raised r_b inside ddll aligns with
groove on battery pack and latches snap inplace
properly. Improper assembly of battery pack can
cause damage to intema_ components.
TO REMOVE BATTERY PACK
•Lock sw_tchtrigger on your ddll by placing the
direction of rotation selector in center position.
See Figure 2.
•Locate latches on end of battery pack and
depress to rsiease battery pack from yourdrill.
See Figure 3.
•Remove battery pack from your drill.