INSTALLING YOUR DVD RECORDER

 

 

 

 

 

Clock setting

5 / 7

 

 

/

 

/

 

 

 

:

 

:

 

 

 

01

01

2005

00

00

00

 

 

 

 

 

 

 

 

 

 

 

 

 

Choose ENTER OK RETURN Back

 

 

Auto search

6 / 7

 

 

 

 

 

 

 

78%

 

 

 

 

 

 

 

Channels found 8

 

 

 

 

 

 

 

 

 

ENTER Cancel

RETURN Back

Completed

7 / 7

Setup has been completed!

Enjoy using your recorder!

OK

5 Check if the time and the date in the page “Clock setting” is correct. If required, change the displayed settings by pressing the button Cor Dto increase or decrease the value of the field. You can also use the number buttons “0-9”instead of the direction keys. Select the next input field by pressing the button Bor Aon the remote control. If your settings are correct, please press “ENTER” to confirm.

6 The automatic TV channel search progress bar appears and the DVD recorder scans for available channels. This may take some minutes. Please wait.

Problem:

The DVD recorder cannot find any TV channels while searching:

Select channel 1 on the TV set. Can you see the stored TV channel on the TV set? If not, check the cable connection from the aerial (aer- ial socket) to the DVD recorder and to the TV set.

Please have patience! The DVD recorder searches the entire fre- quency range in order to find and store the largest possible number of available TV channels. It is possible that the TV channels in your country are broadcast in a higher frequency range. As soon as this range is reached during the search, the DVD recorder will find the TV channels.

If no aerial is connected, cancel the automatic search by pressing “ENTER” and then, if desired, start the automatic channel search (see “Automatic TV channel search” on page 29) at a later date.

7 When the automatic TV channel search is completed, a message will be displayed informing you that the setup has been completed! Then press “ENTER” to finish initial installation.

Problem:

Sound may be distorted on some TV channels:

If the sound is distorted on any of the stored TV channels or if there is no sound at all, the wrong TV system may have been stored for the TV chan- nel. Read in section “Manual TV channel search” on page 28 how to change the TV system.

27

Page 26
Image 26
CyberHome Entertainment 1600 user manual Problem Sound may be distorted on some TV channels, Clock setting