CyberHome Entertainment 1600 user manual Inserting a disc, Playing a DVD-Video disc, DVD menu

PLAYBACK

OPE

Labeling side

Surface

CLOSE

LO

Inserting a disc

1Press the Open/Close button “K” on the front of the device or on the remote control to open the tray. The display shows “OPEN”.

2Carefully place the disc in the tray with the label facing up. Be careful not to touch the playing surface. Hold the disc by the sides and with your fore finger through the hold in the middle and insert gently into the tray.

How to insert a double-sided DVD?

Double-sided discs do not have labelling over the whole surface. The labelling for each side is in the centre of the disc. To play a side its label must be facing up.

3Press the Open/Close button “K” on the front of the device or on the remote control to close the tray. The display shows “CLOSE” and then “LOAD”. The information on the disc is read.

4The inserted disc type is indicated on the screen. If the disc supports the Auto Play function, playback will begin automatically.

Playing a DVD-Video disc

1If playback does not start automatically, press the Play/Pause button “A/I” on the remote control or on the front of the DVD recorder. In the display will appear the chapter and time elapsed.

S OP	2 To stop the disc, press the Stop button “J” on the remote control. On
	the VFD display appears “STOP”.

3To eject the disc, press the Open/Close button “K” on the remote con- trol or on the front of the device.

DVD menu:

When playing a DVD, a menu may appear. If the titles and chapters are numbered, press a number button on the remote control. You can also use the direction buttons “B”, “A”, “C” and “D” to select a menu item and confirm with the button “ENTER”.

You can also access the menu using the button “MENU” on the remote control.

34