CyberHome Entertainment 1600 user manual Problems Index display

MANUAL RECORDINGS

Edit

Format this disc?

OK Cancel

Recording without automatic switch-off 1 Turn on the TV and the DVD recorder.

2 Insert a disc to be used for the recording. The system and content of the disc will be checked. “LOAD” will appear on the display.

Problems:

•Index display:

A DVD+RW disc was inserted that already contains recordings. Use the button “C” or “D” to select a location where the recording should be started.

•A dialog box appears asking if the disc should be formatted or the disc should be ejected:

This disc cannot be used for recordings until the entire disc is format- ted. Select “OK” to format the disc. The disc will be erased.

SOURCE: Tuner
TV
Pr. no.	1
Press	or SOURCE key to select source
	Video 1
	TUNER
	S-Video
	DV	L	R VIDEO-2

REPEAT

7 8 9 A-B

RETURN			CM SKIP
	0	C
REC	SCHEDULE	SOURCE	EDIT

3Select the source you wish to record from using the button “SOURCE” on your remote control. In the example shown on the left side we select “Tuner” as source. In Tuner mode you also have to select the required programme number by using the buttons “CH+” or “CH-”on your remote control.

Tip:

Input sources of the external inputs:

Video 1:	SCART socket 2 on the rear side “EXT 2 AUX”.
S-Video:	SCART socket 2 on the rear side “EXT 2 AUX”.
Video 2:	Video/Audio front sockets “VIDEO IN 2 / L AUDIO IN R”.
DV:	Digital Video (Firewire/i Link) front socket “DV IN”.

4 Press the “REC” button on the remote control or the “RECORD” but- ton on the front panel to start the recording.

5 To stop the recording, press the Stop button “J” on your remote con- trol and on the screen appears the message “Please wait...” together with the progress bar and on the VFD display appears “PROCESS”. Please wait until the message disappears from the screen, then the recording is completed.

Tip:

Making recordings on DVD+R discs compatible:

If you want to play back the recording on a DVD player, you need to finalize the disc in the DVD recorder. See the section “Finalizing DVD+R discs” in chapter “Managing the disc contents” (see page 60).

Problem:

Error message “Recording stopped because disc is full”:

If this message appears during your recording, please insert a new recordable disc and start the recording again from the place your recording was interrupted. Please note that the recording material will not stop after this error message appears.

54