CyberHome Entertainment 1600 user manual Nected hi-fi amplifier, Picture is distorted or black

TROUBLESHOOTING

Distorted sound coming from a con-	• The DVD recorder is connected to the phono input of your amplifier.
nected hi-fi amplifier.	This input socket is provided only for record players without a preampli-
	fier. Select a different audio input.
The picture is distorted or black-	• The TV system of the disc does not match that of your TV (PAL/NTSC).
and-white during playback.	• The recording can only be made in colour when the TV channels or the
	additional connected devices send a colour signal. Black-and-white sig-
	nals without colour information (colour subcarriers) cannot be recorded
	in colour.
No sound signal at the digital output.	• Check whether the sound settings match the selected inputs and the
	additional connected devices.
	• You have inserted an MP3 disc. In accordance with SDMI (Secure Dig-
	ital Music Initiative), the digital audio output is turned off during MP3
	playback. This is not a defect of your DVD recorder.
Flickering black-and-white picture	• Please check if the DVD recorder is connected to a VCR or a TV/Video-
	Set. If so, there will be the Macrovision copyright protection. Please
	directly connect your device to the TV and not to the VCR.
Ejecting a trapped disc.	• The emergency eject feature allows you to remove a disc from the disc
	drive in the very rare case that the tray will not open.
	- Disconnect the recorder from the power supply.
	- On the bottom of your recorder you can see one larger oval opening
	(please see the picture on the left side).
	- Push the plastics inside the emergency hole with help of a slim and
	plane object (e. g. slotted screwdriver) to the left side (about 2 cm; see
	the arrow in the picture and on the device). The tray will then open.
	- Remove the disc from the tray. Close the tray again by hand.

78