MANUAL RECORDINGS

Source: DVD

 

 

Press

or SOURCE key to select source

 

 

 

Video 1

 

 

 

TUNER

 

 

 

S-Video

 

 

 

DV

L

R VIDEO-2

Selecting the input source

Press the button “SOURCE” on your remote control to open the menu for selecting the video input source. With the buttons Band Aor by pressing the “SOURCE” button you can select the different sources. If the required source is displayed on the screen (you can see in the illustration, which input is meant), press the button “ENTER” on your remote control to confirm your selection. The following sources are available.

Video 1: Video 1 input source. An additional device with SCART output has to be connected to the SCART-2 socket “EXT2 AUX” on the rear side of the DVD recorder. The composite video signal will be transferred over the SCART cable (pin 20) when set- ting to “Video 1”. On the VFD display appears “VIDEO_1”.

S-Video: S-Video input source. An additional device with S-Video out- put has to be connected to the SCART-2 socket “EXT2 AUX” on the rear panel of the DVD recorder. The S-Video signal will be transferred over the SCART cable (pin 15 and 20) when setting to “S-Video”. On the VFD display appears

“S_VIDEO”.

DVD: DVD recorder mode. To play back an inserted disc.

DV: DV input source. A digital camcorder has to be connected to the “DV IN” socket on the front panel of the DVD recorder. On the VFD display appears “DV”.

Video 2: Video 2 input source. An additional device with composite video output has to be connected to the “VIDEO IN 2” socket on the front panel of the DVD recorder. On the VFD display appears “VIDEO_2”.

Tuner: To switch into the tuner mode. By pressing the buttons Cand Don your remote control you can change the pro- gramme number. The selected programme number appears on the VFD display.

52

Page 51
Image 51
CyberHome Entertainment 1600 user manual Selecting the input source, Svideo