Connecting the DVD Player to your TV / Receiver
Determining the Video & Audio Connections You Will Use
The first step to using your new DVD Player is to make the cable connections that will allow you to see the video and hear the audio on your TV and optional Stereo or Digital Receiver. Your DVD Player has multiple Video and Audio outputs. Generally, you will only use one Video and one Audio output and any one time. The type of outputs you use will be determined by the capabilities of your Television or receiver. It is recommended that you use the highest quality output that your TV or receiver will support.
Television Connections (One Required)
In order to use your DVD Player, your TV must support at least one of the Video Input types shown below. To get started, identify the best Video Connection shown below that your TV offers and proceed to that section. If you are using your TV’s speakers for audio, rather than a separate receiver or amplifier, you will use the Stereo Audio In, outlined in sections 1 and 2.
Composite Video
& Stereo Audio
VIDEO
IN
GOOD | STEREO AUDIO IN |
| |
| R |
| (RED) |
| L |
| (WHITE) |
1
Page 12
S-Video &
Stereo Audio
| ||
BETTER | IN | |
STEREO AUDIO IN | ||
| ||
| R | |
| (RED) | |
| L | |
| (WHITE) |
2
Page 12
YUV Progressive Scan or Component Video
YUV
PROGRESSIVE SCAN OR
COMPONENT VIDEO IN
BEST | Y | TV |
| ||
| Pb / Cb |
|
Pr / Cr
3
Page 13
Receiver Connection (Optional)
To take advantage of 5.1 Channel Dolby Surround Sound or Digital Theater System (DTS), you’ll need a receiver and a Speaker System with five speakers plus a
CoAxial
Digital Audio
DIGITAL AUDIO IN
4
RECEIVER
COAXIAL
Page 13
11
