CyberHome Entertainment CH-DVD 300 YUV Progressive Scan and Component Video Connections, Dvd

YUV - Progressive Scan and Component Video Connections

Warning: If you selected Progressive SCAN and your TV does not support P-SCAN, the display may go blank and you will not be able to view the Setup Menu to change back the video settings. If this happens, Turn OFF (Standby) the player, Turn back ON Player, Open Disc Tray and Press and hold the STOP button on player for 5 Seconds.

3 Connecting to a TV with YUV - Progressive Scan / Component Video Inputs

In order to enjoy the highest Video Quality available from your DVD Player, you must use a TV equipped with YUV Progressive Scan or Component Video Inputs. If your TV supports YUV Video, it’s recommended that you use this connection. Progressive Scan / Component Video separates the Video Signal into three separate “components”, resulting in a higher quality picture than S-Video or Standard Composite Video. *You must purchase a set of three (3) Component Video Cables for this connection (not included).

Note : Progressive Scan = Y - Pb - Pr and Component Video = Y - Cb - Cr

ŸIn order to activate the YUV VIDEO Output, you must first connect the unit using the COMPOSITE Video Output as described in Section 1.

ŸEnter the SETUP- VIDEO Menu and change the VIDEO OUTPUT setting to YCbCr (See Page 28). *For Help on using the SETUP MENU’s, see Page 27.

ŸSelect SCAN MODEsettings for Interlanced for Component Video and Progressive for Progressive Scan (note: warning on top of page)

ŸNow that the COMPONENT Outputs are Active, connect the COMPONENT VIDEO Outputs from the DVD Player to the inputs on your TV and disconnect the COMPOSITE Cable.

ŸSelect the Video Input Channel on your TV that corresponds to the COMPONENT Video Inputs. On some models, this may be called “Input 3” or “Video 3”. You should now see the DVD Player’s splash screen on your TV.

DVD

DVD				COMPONENT
				or	TV
				PROGRESSIVE SCAN
				VIDEO IN
DIGITAL OUT ANALOG OUT			GREEN OR YELLOW	Y
COAXIAL	VIDEO		BLUE	Pb / Cb
R	OUT
		Y	Pb / Cb Pr / Cr
L	S-VIDEO		RED	Pr / Cr
	OUT
AUDIO AUDIO	VIDEOVIDEO	P-SCAN / COMPONENT VIDEO

Digital Audio Connection

4 Using the CoAxial Digital Audio Output Connection

Your DVD Player features a Digital Audio Output to provide the ultimate in realism for your Home Theater experience. Use this option to get the most out of discs recorded with Dolby 5.1 Digital Surround Sound or Digital Theater System (DTS) by sending the encoded, or “RAW” digital audio signal to your Receiver for decoding. You must be using a Digital Receiver with 5.1 Channel Decoding and a CoAxial Digital Input to take advantage of this feature.

ŸYou must purchase a separate Coaxial Digital Audio Cable for these connections, as these cables are not included with the DVD Player.

ŸConnect the Coaxial Digital Audio Out of the DVD Player to the corresponding Input of your Receiver.

ŸAdjust your Receiver’s Input Source Setting to the correspond with the Digital Audio In.

DVD

DIGITAL OUT ANALOG OUT

		COAXIAL DIGITAL
COAXIAL	VIDEO	AUDIO IN
R	OUT
	Y	Pb / Cb Pr / Cr
L	S-VIDEO
	OUT

RECEIVER

AUDIO AUDIO VIDEOVIDEO P-SCAN / COMPONENT VIDEO

13