CyberHome Entertainment CH-DVD 300 owner manual Back Panel Connectors

Back Panel Connectors

Connections on the Back Panel

The back panel is where you’ll find all the physical connections for the DVD Player. You will only use one Video and one Audio connection at any given time. For instance, if you’re using the Composite Video jack to connect to your TV, the S-Video and YUV Progressive Scan / Component connectors will be unused.

*AC Power Switch

Turns the main power OFF/ON. Must be set to ON for unit to operate.

Composite Video Connector

Typical connection. Connect Yellow cable to TV Video In.

AC SWITCH
ON
I		R	VIDEO		PROGRESSIVE SCAN
	~100-230V			COMPONENT VIDEO OUT
O
	AC IN			Y	Pb / Pb	Pr / Cr
	COAXIAL	AUDIO OUT	S-VIDEO
OFF		L

*AC Power Inlet

Insert the power cord here first. Then, plug other end to AC Outlet (~100-230V).

Coaxial Digital Audio Connector

Use special Coaxial Digital Audio Cable to connect to Digital Receiver.

YUV - Component Video /

Progressive Scan Connectors

Y, Pr/Cr & Pb/Cb connectors for use with TVs compatible with Component / Progressive Scan Video.

S-Video Connector

Use special S-Video Cable to connect to TV’s

S-Video In jack.

Stereo Analog Audio Connectors

Use White/Red Audio Cable to connect to

Audio In (L/R) of TV or Receiver.

* Some modes of the player may vary without Power Switch and power cord is already attached to the player.

			PROGRESSIVE SCAN
R	VIDEO	COMPONENT VIDEO OUT
COAXIAL AUDIO OUT	S-VIDEO	Y	Pb / Pb	Pr / Cr

L

10