Preparing and Using the Remote Control
Installing the Batteries
If the remote control only operates when you get closer to the DVD Player, it may mean the battery is weak. Please replace the battery (Lithium battery) simultaneously with new battery (CR2025) of the same type. Please note the positive (+) side is facing upwards on the remote.
1.Pull out the battery holder to remove the battery compartment.
2.Insert new Battery into the battery holder. Make sure that positive (+) side is facing upwards.
3.Put the battery holder back on the remote.
Important Note about Batteries
ŸIf the unit will not be used for an extended length of time, it’s wise to remove the batteries before storage.
ŸThe life of the battery depends on the amount of usage. With typical use, a battery life of approximately 6 months can be expected.
Operation of Remote Control
When using the control, please aim at the device's remote control sensor, located in the DVD
/ 
/
PROGRESSIVE SCAN VIDEO
CH-DVD 300
30 
30
POWER | DISPLAY | SETUP | OPEN/CLOSE |
TITLE | MENU | GOTO | PROGRAM |
| PBC |
|
|
ANGLE | SUBTITLE | AUDIO | MUTE |
PLAY |
STOP |
ENTER
PAUSE
RETURN BOOKMARK ZOOM |
| SLOW | ||||
|
|
|
|
|
|
|
1/ALL
REPEAT
EFFECTS
INTRO
10+
Quick Tips
ŸMake sure no objects are between the remote and the player.
ŸSimilar remote controls could interfere with the function of the player.
ŸMake sure not to store the remote upside down or with any objects pressing on the buttons - this could drain the battery.
6
