Cypress CY7C1526JV18, CY7C1511JV18 manual Write Cycle Descriptions, CY7C1513JV18, CY7C1515JV18

									CY7C1511JV18, CY7C1526JV18
									CY7C1513JV18, CY7C1515JV18
Write Cycle Descriptions
The write cycle description table for CY7C1511JV18 and CY7C1513JV18 follows. [2, 10]
	BWS	0/	BWS	1/	K				Comments
							K
	NWS0		NWS1
	L		L		L–H		–	During the data portion of a write sequence:
								CY7C1511JV18 − both nibbles (D[7:0]) are written into the device.
								CY7C1513JV18 − both bytes (D[17:0]) are written into the device.
	L		L		–	L-H		During the data portion of a write sequence:
								CY7C1511JV18 − both nibbles (D[7:0]) are written into the device.
								CY7C1513JV18 − both bytes (D[17:0]) are written into the device.
	L		H		L–H		–	During the data portion of a write sequence:
								CY7C1511JV18 − only the lower nibble (D[3:0]) is written into the device, D[7:4]			remains unaltered.
								CY7C1513JV18 − only the lower byte (D[8:0]) is written into the device, D[17:9]		remains unaltered.
	L		H		–	L–H		During the data portion of a write sequence:
								CY7C1511JV18 − only the lower nibble (D[3:0]) is written into the device, D[7:4]			remains unaltered.
								CY7C1513JV18 − only the lower byte (D[8:0]) is written into the device, D[17:9]		remains unaltered.
	H		L		L–H		–	During the data portion of a write sequence:
								CY7C1511JV18 − only the upper nibble (D[7:4]) is written into the device, D[3:0]			remains unaltered.
								CY7C1513JV18 − only the upper byte (D[17:9]) is written into the device, D[8:0]			remains unaltered.
	H		L		–	L–H		During the data portion of a write sequence:
								CY7C1511JV18 − only the upper nibble (D[7:4]) is written into the device, D[3:0]			remains unaltered.
								CY7C1513JV18 − only the upper byte (D[17:9]) is written into the device, D[8:0]			remains unaltered.
	H		H		L–H		–	No data is written into the devices during this portion of a write operation.
	H		H		–	L–H		No data is written into the devices during this portion of a write operation.

Write Cycle Descriptions

The write cycle description table for CY7C1526JV18 follows. [2, 10]

BWS0	K	K	Comments
L	L–H	–	During the Data portion of a write sequence, the single byte (D[8:0]) is written into the device.
L	–	L–H	During the Data portion of a write sequence, the single byte (D[8:0]) is written into the device.
H	L–H	–	No data is written into the device during this portion of a write operation.
H	–	L–H	No data is written into the device during this portion of a write operation.

Note

10.Is based on a write cycle that was initiated in accordance with the Write Cycle Descriptions table. NWS0, NWS1, BWS0, BWS1, BWS2, and BWS3 can be altered on different portions of a write cycle, as long as the setup and hold requirements are achieved.

Document Number: 001-12560 Rev. *C Page 11 of 27

[+] Feedback