Section 4 - Configuration

Setup > Network Setup

Network Setup allows you to configure your LAN and Internet configuration.

DHCP Connection: This allows your camera to get an IP address automatically from your router or Internet service. If you are not sure which LAN settings to use, try using DHCP mode first.

Static IP Address: This allows you to manually set the IP address information for your camera.

IP Address: Enter the IP address the camera should use.

Subnet Mask: Enter the subnet mask that the camera should use.

Default Gateway: Enter the default gateway that the camera should use.

Primary DNS: Enter the IP address of the primary DNS server that the camera should use.

Secondary DNS: Enter the IP adress of the secondary DNS server that the camera should use.

Note: If you need to use a static IP address and you do not know the network information, contact your Internet Service Provider (ISP) for assistance.

D-Link DCS-1100/1130 User Manual

21

Page 26
Image 26
D-Link DCS-1130 manual Setup Network Setup