Section 4 - Configuration
Maintenance > System
This screen allows you to save and restore the camera’s current configuration. You can also reset all settings to factory default or reboot the device.
Save To Local Hard Drive: Click on the Save Configuration button to save the current configuration to a hard drive.
Load From Local Hard Drive: To load a saved configuration, click on the Browse button to select a configuration file from your hard drive. Then, click theLoad Configuration button to load the new configuration.
Restore To Factory Defaults: Click this button to reset all settings to their factory defaults. If you choose to reset your settings, you will need to set up your camera again.
Reboot Device: Clicking the Reboot button will reboot your device.
38 |
