Section 4 - Configuration
Setup > Audio and Video
You may configure four video profiles with different settings for your camera. You may also set up different profiles for your computer and mobile display. In addition, you may configure the audio (speakers and microphone) settings for your camera.
Encode Type: This sets the video codec used for the video stream. You can choose
Resolution: This sets the display resolution of the video stream. If the Resolution is different than the Sensor Output size, the video will be shrunken or enlarged to the Resolution size you set here.
FPS: This sets the target number of frames per second (FPS) for the video stream. Higher frame rates will provide smoother video.
bps: This sets the target bitrate of the video stream. Higher bitrates will provide better quality video. When the Encode Type is set to MJPEG, you cannot change the bps setting. Also, available bps settings may change depending on what the Encode Type, Sensor Output, Resolution, and FPS settings are set to.
JPEG Quality: This sets the JPEG quality of any manual snapshots you take when this video profile is selected
RTSP URL: This setting allows you to set a suffix for your camera’s RTSP URL so you can view your camera’s video with this video profile’s settings. For example, if you enter“mpeg4”as your RTSP URL setting and your camera’s IP is 192.160.0.30, you can view your camera’s video with these settings through 192.160.0.20/mpeg4.
26 |
