Getting Started | 83 |
Connecting a printer |
TECHNICAL NOTE: To determine if your printer supports Plug and
Play, check its documentation.
If your printer does not support Plug and Play, you can set up the printer as described in “Setting up a printer” on page 83.
To connect a printer to your computer:
1 Connect the printer cable to the printer and then connect the other end to one of the computer’s USB ports.
2Plug the printer’s power cable into a live AC outlet.
Setting up a printer
NOTE Some printers require a specific installation process. Refer to your printer installation guide for instructions before completing the following procedure.
If your printer does not support Plug and Play, follow these steps to set it up for the first time. You only need to set up the printer once.
1Click Start, Control Panel, Hardware and Sound, and then under Devices and Printers, click Add a printer.
The Add Printer Wizard appears.
(Sample Image) Add Printer Wizard
2Follow the