Getting Started

79

Using external display devices

 

 

 

 

 

 

NOTE TouchPad setting options vary by computer model. The TouchPad settings are accessible through the Mouse Properties option of the Windows Control Panel. For more information, please visit www.support.toshiba.com, and enter the phrase “Mouse pointer jumps around as you type” into the Search field.

Disabling or enabling the TouchPad™

The TouchPad™ is enabled by default. To enable/disable the TouchPad, do one of the following:

Press the TouchPad ON/OFF ( ) button. (Available on certain models.)

Press Fn + F9. For more information, see “Disabling or enabling the TouchPad™” on page 202.

NOTE Alternately, you can disable only the tapping feature. If you disable tapping only, you can still use the TouchPad’s control buttons and move the pointer by sliding your finger on the TouchPad. To disable tapping only, use the Mouse Properties option in the Windows Control Panel.

Using external display devices

Your computer comes with a built-in display, but you can also connect the following types of external display devices to the video ports described below:

An HDMI™-compatible television or external display device via the HDMI™ Out port*

NOTE Locate the HDMIOut port on the Quick Start Card that shipped with your computer.

An external monitor or projector via the RGB (monitor) port

HDMI™ Out port*

RGB (Monitor) port

*Available on certain models

(Sample Illustration) Video ports on the side of the computer

Page 79
Image 79
Toshiba L650, L640 manual Using external display devices, Disabling or enabling the TouchPad