
Getting Started | 91 |
Turning off the computer |
NOTE These options can be set separately for how they operate while the computer is running on battery power or while connected to AC power.
❖Lid close action
Set this option to Hibernate if you want the computer to go into Hibernation mode when you close the display panel.
❖Power button action
Set this option to Hibernate if you want the computer to go into Hibernation mode when you press the power button.
6Click Apply.
7Click OK.
Once the computer is configured, you can place it into Hibernation mode by either pressing the power button or closing the display panel, depending on the Hibernation options set.
Starting again from Hibernation mode
To start up the computer from Hibernation mode, press the power button until the ON/OFF light glows white. The computer returns to the screen(s) you were using.
If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel.
Using and configuring Sleep mode
To turn off the computer using the Sleep command:
1Click Start, and then click the arrow next to the Shut down button in the
Sleep
Start button | Arrow |