46

Getting Started

Connecting to a power source

To connect AC power to the computer:

1Connect the power cord/cable to the AC adaptor.

(Sample Illustration) Connecting the power cord/cable to the AC adaptor

_ +

Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.

2Plug the AC adaptor cord into the DC-IN on the side of the computer.

NOTE Locate the DC-IN port on the Quick Start Card that shipped with your computer.

3Connect the power cord/cable to a live electrical outlet.

The AC power light on the indicator panel glows white.

Never attempt to connect or disconnect a power plug with wet hands. Failure to follow this instruction could result in an electric shock, possibly resulting in serious injury.

The computer’s main battery light gives you an indication of the main battery’s current charge:

Glows amber while the main battery is being charged (AC adaptor connected)

Glows white when the main battery is fully charged

Is unlit when the main battery has discharged, the battery is not charging, or the AC adaptor is not plugged into the computer or AC outlet

Page 46
Image 46
Toshiba L640, L650 manual Connecting to a power source