D-Link DCS-5300 The Schedule Scheme operations, Using IP surveillance Software continued, Load

Using IP surveillance Software (continued)

Scheduling (continued)

There are three modes in the secondary schedule: Disable, Event mode, and Continuous mode. If event mode is selected in the secondary schedule, the camera will record whenever an event is triggered. If continuous mode is selected, the camera will begin recording continuously after scheduling settings are saved. These two modes are the same as the primary schedule. Please refer to the previous section for more detail.

The Schedule Scheme operations

There are six related buttons. “Load…”, “Undo”, “Clear”, “Save”, “Save as…” and “Close” for handling the schedule schemes. These operations are shown in the figure below.

Load...

This button allows you to load pre-edited schedules from the scheduling directory for the selected video channel. Note that you should save the schedule you are currently working on before loading a new one. Otherwise, the current changes will be lost.

Clear

This button will clear all changes in the current schedule of the selected video channel.

Save

This button is used for saving changes to the current schedule.

Save As...

This button is used to save the current schedule as another file name instead of the default name.

Undo

Click on this button to undo all changes for the current schedule since the last save.

Close

Click on this button to close the scheduler.

106