D-Link DCS-5300 manual Camera Configurations, TheAdmin Privilege, Monitor Program continued

Using IP surveillance Software (continued)

Monitor Program (continued)

TheAdmin Privilege

In the monitor tool system, the admin privilege has the right to access the DCS- 5300 Network Camera through this application software and change the local settings as well. But the admin privilege is not the same as the admin privilege as the internet camera. You can change the settings of each selected internet camera in the remote site only if you have the admin privilege of the internet camera.

If you have the admin privilege, you have the right to do the following items:

Run the configuration tool

Change the recording schedule

Change the local settings

Again, if you need to change the settings of the DCS-5300, you must have the password of the admin user.

Camera Configurations

When you log in for the first time, you should configure this application software to connect the DCS-5300in “Configuration Menu > Camera Configurations”, shown in the figure below. You will need the admin (administrator) privilege in order to run the configuration.

Once you click “Configuration Menu > Camera Configurations” for setting each camera, all recording processes will be stopped with a warning window popped up in advance to keep you informed.

77