D-Link DCS-5300 manual Hardware Installation, Attaching the Internet Camera to the Camera Stand

Hardware Installation

Connect an Ethernet cable

Connect an Ethernet cable to the network cable connector located on the DCS-5300’s back panel and attach it to the network.

Attach the external power supply

Attach the external power supply to the DC power input connector located on the DCS-5300’s back panel labeled 12VCD and connect the other end to your wall outlet.

When you have a proper connection, the LED will turn from red to green. If you are directly connected to the camera via a crossover cable, the light may cycle on and off and your computer may show an intermittent loss of connectivity. This is normal until you have configured your Internet Camera.

Attaching the Internet Camera to the Camera Stand

The Internet Camera comes with a camera stand with a swivel ball screw head that can be attached to the Internet Camera bottom socket cavity. Attach the camera stand to the Internet Camera and station it for your application. There are holes located in the base of the camera stand allowing the Internet Camera to be mounted to the ceiling, or any wall securely.

9