D-Link DCS-5300 HTTP Settings, Streaming Settings, Configuration Advanced Network continued, Mode

Using the DCS-5300 with an Internet browser (continued)

Configuration > Advanced >Network (continued)

Primary FTP Passive Mode-

2nd FTP server -

If the DCS-5300is located inside a network that is protected by a firewall, a data connection for FTP may be prohibited. Passive mode FTP can bypass this rule and allow the uploading of snapshots. If the passive mode is selected, the DCS-5300can automatically attempt to upload in active mode if the external FTP server does not support passive mode.

The domain name or IP address of the external FTP server. Note that the 2nd FTP server will only be used if the 1st FTP is unavailable. If image upload to the 1st FTP is successful, no attempts will be made to connect to the 2nd FTP server.

2nd FTP user name -	Granted user name on the backup FTP server.
2nd FTP password -	Granted password on the backup FTP server.
2nd FTP remote folder - Granted folder on the backup FTP server.
Secondary FTP passive
Mode -	Passive mode setting for the backup FTP server.
HTTP Settings
HTTP Port-	Can be set to other than the default port 80. When
	the administrator changes the HTTP port of the
	DCS-5300(which has an IP address of
	192.168.0.146) from 80 to 8080, users must type
	http://192.168.0.100:8080 in the Web browser
Streaming Settings	bar.
Control channel port -	Can be set to other than the default port 5001 to
	correspond with the port opened by the firewall.

.

41