D-Link DCS-5300 Monitor Program continued, Logging In, Using IP surveillance Software continued

Using IP surveillance Software (continued)

Monitor Program (continued)

Layout area

You can change the monitoring layout in this area. There are six kinds of layouts: 1, 4, 6, 9, 13, or 16 video display frames in the video area.

Hard disk status

In this area, you can get the status of the hard disk in which the video database resides in. The status reminds you to arrange the available storage size of the recorded video database.

Common control area

This area includes volume control, manual recording, video printing, snapshot, and trash can to remove video from display frames.

P/T control

This tool allows you to pan, tilt, auto patrol, and move the camera to a preset position.

DI/DO control

This tool receives the digital input signal and sends digital output signal to the remote Video Server/ Network Camera series product associated with the dedicated video channel.

Alert Message

This tool will display the latest alert messages received by the remote Video Server / Network Camera series product associated with the selected video channel.

Logging In

You need to login the first time when you start the Launcher. The authentication window is shown below. If you do not have an account, the monitor tool will not execute. You must log in as admin (administrator) to use this application. Enter the password for the administrator.

76