D-Link DCS-5300 Configuration Advanced Network, General Settings, Smtp, IP address, Subnet mask

Using the DCS-5300 with an Internet browser (continued)

Configuration > Advanced > Network

Reset IP Address at next boot

Once the DCS-5300is configured, this box should be unchecked at all times. If the box has been checked and the connection is lost, run Installation Wizard to find the camera’s IP address.

General Settings

IP address -	Necessary for network identification.
Subnet mask -	Used to determine if the destination is in the same
	subnet. The default value is “255.255.255.0.”
Default router -	The router used to forward frames to destinations
	in a different subnet. Invalid router settings may
	cause the failure of transmissions to a different
	subnet.
Primary DNS -	Primary domain name server that translates
	names to IP addresses.
Secondary DNS -	Secondary domain name server to backup the
	primary one.
SMTP
SMTP (mail) server 1 -	The domain name or IP address of external mail
	server.

SMTP account name 1 - The user name used to log into your e-mail account (e.g. jdoe or jdoe@yourisp.com depending on your ISP).

SMTP password 1 - The password used to log into your e-mail account. (The password will appear as dots instead of entered characters.)

Recipient email address 1 - The e-mail address of recipients for snapshots or a system log file. Multiple recipients must be separated by a semicolon “;”

39