43
Using the Configuration Menu (continued)
Advanced > SNMP
SNMP (Simple Network Management Protocol) is a widely used network monitoring and
control protocol that reports activity on each network device to the administrator of the
network. SNMP can be used to monitor traffic and statistics of the DI-704UP. The DI-
704UP supports SNMP v1.
Enabled or Disabled:
Click Enabled to enable SNMP. Click Disabled to de-activate SNMP.
Get Community:
“Read only” access for network administration using SNMP. You can view the network,
but no configuration is possible with this setting.
Set Community:
“Read and Write” access for network administration using SNMP. The administrator can
configure the network with this setting.
Local:
SNMP services will be available on the Local (LAN) network.
Remote:
SNMP services will be available on the remote (WAN) network.