
Network Setup
Turn everything off.
A. Power OFF your Cable or DSL modem. If your modem does not have an on/off switch, disconnect the power cable.
B. Turn OFF your computer.
C. Do NOT connect the power adapter to your
Connect the D-Link Router Cables.
A. Connect the Ethernet (or networking) cable from the Cable or DSL modem to the WAN port of the router.
B. Use the
Power up the devices in sequence.
A. Power up the Cable or DSL modem. Wait until the modem has made the connection to your Internet Service Provider’s (ISP’s) network.
Note: Please see the Manual included with your modem for an explanation of the modem’s LEDs.
B. Power up the
C. Turn on your computer.
D. Now, refer to either the Quick Installation Guide or continue to follow this manual to complete the installation process.
11