D-Link manual Resetting the DI-704UP To the Factory Default Settings

Resetting the DI-704UP

to the Factory Default Settings

After you have tried other methods for troubleshooting your network, you may choose to Reset the DI-704UP to the factory default settings.

To hard-reset the D-Link DI-704UP to the Factory Default Settings, please do the following:

„Locate the Reset button on the back of the DI-704UP.

„Use a paper clip to press the Reset button and power on.

„Hold for about 5 seconds and then release. (Or release when the status LED flashes.)

„After you have completed the above steps, the DI-704UP will be reset to the factory default settings

75