Using the Configuration Menu (continued)
Tools > Admin
Remote Management:
Remote Management allows the
IP Address:
Internet IP address of the computer that has access to the Broadband Router. It is not recommended that you set the IP address to 0.0.0.0, because this allows any Internet IP address to access the Broadband Router, which could result in a loss of security for your network. If you elect to Enable Remote Management, enter the IP Address of your remote location.
Port:
Select the port number used to access the Broadband Router.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the WAN IP address of the Broadband Router and 8080 is the port used for the
Tools > Time
The system time is the time used by the
48
